| PART |
Description |
Maker |
| AT91F40816 AT91F40816-33CI |
The AT91F40816 features 8K bytes of on-chip SRAM, 2M bytes of Flash, an External Bus Interface, a 3-channel Timer/Counter, 2 USARTs, a Watchdog Timer and advanced power-saving features.
ARM Thumb Microcontrollers
|
ATMEL Corporation
|
| CAT1026UE-30TE13 CAT1026UE-42TE13 CAT1027PE-42TE13 |
AC Solid State Switch using optical coupling
AC Solid State Switch utilizing dual power SCR outputs
SWITCH PRESSURE N.C. 10PSI
GAS SURGE ARRESTOR
SWITCH PRESSURE N.C. 4PSI
XTAL CER SMT 11X5 4PAD
OSC 3.3V SMT 14X9 CMOS
SWITCH PRESSURE D.C. 4PSI
OSC 3.3V SMT 7X5 CMOS
IGBT Modules up to 3300V Diodes; Package: A-IHM130-1; IF (typ): 800.0 A; Configuration: Diode Modules; Technology: IGBT2 Standard; Housing: IHV 130 mm; Features: -;
SCR / Diode Modules up to 1400V SCR / Diode Fast
MLT Series Linear Position Transducer, 12,7 mm [0.5 in] Electrical Travel, 1.0 % Linearity, Item Number F38000100
Oscillator; Oscillator Type:SPXO; Frequency:80MHz; Frequency Tolerance: /- 50 ppm; Load Capacitance:15pF; Crystal Terminals:PCB Surface Mount; Supply Voltage:3.3V; Mounting Type:Surface Mount
350V, 120mA, 35 1-Form-B relay with an optocoupler
Modular Connector; Features:Category 6 specifications
COILTRONICS RoHS Compliant: Yes
350V, 120mA, 20, 1-Form-A relay with an optocoupler for telecom
RELAY OPTO TELCOM 120MA 8 FLT PK
RES,1206,5%,1/8W,330 OHM
350V, 120mA, 35 1-Form-A current limiting relay with an optocoupler for telecom
350V, 120mA, 35 1-Form-A relay with an optocoupler for telecom
Dual Voltage Supervisory Circuits with I2C Serial 2k-bit CMOS EEPROM 双电压监控电路，带有I2C串行K位CMOS EEPROM
2-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
2-CHANNEL POWER SUPPLY SUPPORT CKT, DSO8
|
Catalyst Semiconductor
http://
BCD Semiconductor Manufacturing, Ltd.
TE Connectivity, Ltd.
ITT, Corp.
Glenair, Inc.
ON SEMICONDUCTOR
|
| RIF-3-RPT-LDP-24DC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket
|
PHOENIX CONTACT
|
| RIF-4-RPT-LV-230AC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket.
|
PHOENIX CONTACT
|
| RIF-3-RPT-LV-120AC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket.
|
PHOENIX CONTACT
|
| RIF-1-RSC-LV-230AC |
Pre-assembled relay module with screw connection, consisting of: relay base, multi-layer contact relay, plugin display/interference suppression module, and retaining bracket.
|
PHOENIX CONTACT
|
| RIF-1-RSC-LV-120AC |
Pre-assembled relay module with screw connection, consisting of: relay base, multi-layer contact relay, plugin display/interference suppression module, and retaining bracket.
|
PHOENIX CONTACT
|
| RIF-2-RSC-LDP-125DC |
Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 125 V DC
|
PHOENIX CONTACT
|
| RIF-0-RSC-12DC |
Pre-assembled relay module with screw connection, consisting of: relay base with ejector and multi-layer gold contact relay. Contact type: 1 N/O contact. Input voltage: 12 V DC
|
PHOENIX CONTACT
|
| AT90SC9636R |
AT90SC9636R Summary [Updated 06/03. 3 Pages] Summary of the AT90SC9636R giving the key features. a brief description and a block diagram.
Low-power, High performance 8-bit/16-bit secure microcontroller with 96K Byte ROM, 36K Byte EEPROM, programmable internal oscillator. Security Features: MMU, MED, OTP (one time programmable) EEPROM area, RN (Random Number Generator), "out
|
Atmel
|
| RIF-RHM-4 |
Relay retaining bracket, wire model, suitable for RIF-4 relay base
|
PHOENIX CONTACT
|
|
